Introducing the most advanced branding iron system on earth.
Never worry about over- or under-heating again. No more using analog voltage controllers to guess at the temperature. The SmartBrand system uses a closed-loop feeback system to heat your brand to the specified temperature every time. The TC-5 Digital heat controller keeps the heat within a few degrees. Not using it? It saves power. Using it a lot? It cranks up the juice. Fast. Easy. Consistent. Choosing the only branding iron system with a brain is a no-brainer.
The SmartBrand system can run individual plates as large as 25in² (to find your surface area, multiply the height of your logo by the width). And it runs small plates just as easily!
Aluminum or Brass?
We make our removable branding heads from a solid bar of aircraft-grade 6061-T6 aluminum alloy or ultra-tough brass alloy; they are not cast or molded. Both materials produce identical results as far as sharpness and detail. Go for aluminum if you plan to use your branding iron occasionally but if you need something tougher for a professional environment, go for brass.
The stainless-steel handle of the electric branding iron is topped with a comfortable hardwood grip, so you can make your mark easily! All components are made right here in the U.S.A.
Wood, leather, food and plastic
Our brands are primarily designed to be used on wood, but they can also be used on leather, food and other soft materials, such as plastic. However, your plate needs a deeper relief when used on these surfaces. Keep that in mind when placing your order.
Please note our Electric Irons are only sold within North America.
The standard voltage is 120V, 60Hz. Our irons are designed to operate on 110-120V, either AC or DC. The plug is a standard 3-pronged US plug (NEMA 15-5).
Make your mark
Give your work a professional touch with our custom drill press mounted electric branding system and leave a mark that will never fade away.
You can also expand your range by purchasing extra custom-made plates to fit onto the same custom drill press mounted electric branding system.
Our set includes:
Mounted Branding Tool
Custom Branding Iron Head
TC-5 Digital Heat Control
Custom made per your specifications
Cut with a standard relief (for wood) or a deep relief (for wood, food, leather and plastic)
Mounts in a 1/2" or larger chuck. Please check the capacity of your drill press before ordering.
Made from aluminium or brass
Standard voltage is 120V, 60Hz
Made in the U.S.A. TC-5 Digital controller contains imported material.
The Process of getting the branding Iron created was interesting, The time from Order to delivery was great. The system Arrived and we began testing the different temperature settings to get the correct effect we were looking for. It turned out 630 degrees was just right and we can stamp multiple times with the same effect every time It is a AWESOME set up. I recommend a Leather Hole Puncher Hand Arbor Press for DIY Leather Craft, it is what we are going to use instead of Drill press . The Folks at GearHeart where very easy to work with. We are very happy with the investment of this tooling Thank you Gearheart Industry for the Quality involved in making the equipment and the Great Customer service