SmartBrand Branding System

Measurement *
Head Material *
Did you enter the correct dimensions above? Please double-check to avoid delays in production! *
File types are: bmp, gif, jpg, jpeg, jpe, jif, jfif, jfi, png, wbmp, xbm, tiff, ai, eps, pdf Maximum file size is: 524288KB

Product Information

Introducing the most advanced branding iron system on earth.

Never worry about over- or under-heating again.  No more using analog voltage controllers to guess at the temperature.  The SmartBrand system uses a closed-loop feeback system to heat your brand to the specified temperature every time.  The TC-5 Digital heat controller keeps the heat within a few degrees.  Not using it?  It saves power.  Using it a lot?  It cranks up the juice.  Fast.  Easy.  Consistent.  Choosing the only branding iron system with a brain is a no-brainer.  

The SmartBrand system can run individual plates as large as 25in² (to find your surface area, multiply the height of your logo by the width).  And it runs small plates just as easily!  

Aluminum or Brass?

We make our removable branding heads from a solid bar of aircraft-grade 6061-T6 aluminum alloy or ultra-tough brass alloy; they are not cast or molded.  Both materials produce identical results as far as sharpness and detail. Go for aluminum if you plan to use your branding iron occasionally but if you need something tougher for a professional environment, go for brass.

The stainless-steel handle of the electric branding iron is topped with a comfortable hardwood grip, so you can make your mark easily! All components are made right here in the U.S.A.

Wood, leather, food and plastic

Our brands are primarily designed to be used on wood, but they can also be used on leather, food and other soft materials, such as plastic. However, your plate needs a deeper relief when used on these surfaces. Keep that in mind when placing your order.


The standard voltage is 120V, 60Hz. Our irons are designed to operate on 110-120V, either AC or DC.  The plug is a standard 3-pronged US plug (NEMA 15-5). 

Make your mark

Give your work a professional touch with our custom electric branding iron and leave a mark that will never fade away.

Our set includes:

Electric Custom Branding Iron

TC-5 Digital Heat Controller

Stainless Steel Handle, with a Hardwood Grip


Custom made per your specifications

Cut with a standard relief (for wood) or a deep relief (for wood, food, leather and plastic)

Made from aluminum or brass

Standard voltage is 120V, 60Hz

Interchangeable with our custom leather stamps

Made in the U.S.A. TC-5 Digital controller contains imported material.

Current Stock:
starting_at As low as: $412.00 show_dynamic_sq_in show rush_production_charge 65 cut_depth_standard 0 cut_depth_modified 5 head_material_aluminum 15 head_material_brass 20 markup_multiplier 1.10

Customer Reviews 5 (1 Review) Write a review of this product

5 Stars
Upgraded to the SmartBrand Branding System

Hey, I just upgraded my branding iron. Originally had the torch heated iron, which worked ok, but this SmartBrand iron is amazing. It heats much faster, gives better results and I think it’s a little safer. I would definitely recommend this system to anyone who has to do bulk branding.